| Function |
Carries one 20 ft or two empty 20 ft or one 40 ft. ISO container. Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States. |
| Overall Chassis Length |
40 ft 6 inches |
| Overall Chassis Width |
96 inches |
| Axle Location |
30 ½ inches from rear of chassis |
| Kingpin Location |
24 inches from rear face of front bolster |
| Maximum Rear Height |
48 in. |
| Main Beams |
Fabricated with 3/8 inch x 4 gr 80 flanges and 7 ga web. |
| Gooseneck Beams |
Fabricated with 3/8 inch x 4 gr 80 flanges and 1/4 inch web. |
| Cross Member |
All cross members are formed from 10-gauge steel |
| Upper Coupler Assembly |
Pick up plate is 1/4" thick and extends approximately 18" behind the kingpin and is reinforced fore and aft by 1/4 inch
formed channels |
| Front Bolster |
1/4 inch thick channel 9 inch high x 6 inch deep with 10 gauge stiffeners |
| Sliding Pallet |
Made from (ten) 4 inch I beam members. Connected to
bolsters containing two fixed, two retractable and two swing
down twist locks. |
| Slider Mechanism |
Lock engagement ensured by two spring-loaded pins
through main beams. A weld washer secured polyethylene
slide pad facilitates sliding. |
| ICC Bumper |
4 inch x 4inch x 3/16 inch Tube step bumper. Two (2)
rubber bumpers. |
| Landing Gear |
Two speed AAR approved, square leg. 50,000 lb. lift
capacity and 140,000 static load capacity. |
| Landing Gear Axle Type |
Standard |
| Landing Gear Foot Group |
10 in. by 10 in. Low profile sandshoe |
| Crank Handle Location |
Curb side handle |
| Suspension |
Hendrickson |
| Axle Quantity |
Three Axles |
| Suspension Type |
Air-Ride (no automatic dump) |
| Axle Centers |
122 inch |
| Springs |
None |
| Hub Type |
Hub piloted for disc wheels |
| Hub Material |
Steel |
| Hub Manufacturer |
KIC |
| Drum |
Outboard mounted |
| Rim/Wheels |
8 1/4 X 22.5 hub piloted tubeless |
| Wheel/Rim Color |
White |
| Rim Spacer |
None |
| Tires |
Cheetah Supplied |
| Tire Size |
295/75R 22.5 (no substitutions permitted) |
| Tire Inflation System |
None |
| Axle Vendor |
Hendrickson |
| Axle Type |
HP |
| Wall Thickness |
5/8 inch |
| Axle Track |
77.5 |
| Brake Lining Options |
Standard |
| Lubrication |
Oil 90 wt. |
| Slack Adjusters |
Meritor 5 1/2 inch |
| Brake System Vendor |
WABCO |
| Brake System Type |
2S1M |
| Brake Chambers |
Haldex |
| Hubodometer |
None |
| Electrical System |
12 volt, 7-way split pin receptacle plug; modular wiring harness |
| Light Vendor |
TruckLite |
| Light Attachment |
Grommet mounted |
| Light Type |
Incandescent |
| Metal Preparation |
Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial
Blast Cleaning" |
| Primer |
70% Zinc Rich Primer |
| Topcoat |
Urethane Topcoat |
| Color |
Black |
| Markings |
FHWA plate, tare weight, 2 small Cheetah logos. |
| Customer Decals |
Furnished by Customer |
| Conspicuity |
Meets DOT requirements |
| Registration Holder |
Plastic with clear screw on top |
| Mud Flaps |
Cheetah Supplied |
| Mud Flap Mounting |
4 mounting bolts |
| Steel & Fastners |
All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50. All structural fasteners are Grade 5 or better and
are zinc coated |
| GVWR |
75,000 for 40 ft container
63,000 for 20 ft container
|
| Weight |
Approximately 10,100 lbs. + 2% |