| Function |
Carries one 20 ft or one 40 ft ISO container rated for 24 metric tone when using a 16,200 lb tractor. Meets all DOT, TOFC, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of manufacture and applicable to operation in the United States. |
| Overall Chassis Length |
Closed: 32ft 6in
Extended: 40ft 6in |
| Overall Chassis Width |
96 inches |
| Axle Location |
25 1/2 inch from rear to center of rear axle. |
| Slide Range |
96 inches |
| Kindpin Height |
48 inches |
| Kingpin Location |
21 inches from rear face of front bolster |
| Maximum Rear Height |
48 inches |
| Main Beams |
Fabricated I-Beam with 1/2" x 5" grade 100 flanges |
| Bogie Beams |
Fabricated I-Beam
Top flange: 1/2" x 5" gr 100
Bottom flange: 1/2" x 6" gr 80 |
| Cross Member |
All cross members are formed from 7 ga steel |
| Upper Coupler Assembly |
Pick up plate is 5/16" thick and extends approximately 18" behind the kingpin and is reinforced fore and aft by 1/4" formed channels |
| Bracing |
Lateral Bracing |
| Front Bolster |
7 ga thick channel 9" high x 6" deep with 10 ga stiffeners |
| Intermediate Bolster |
5/16" wall x 6" x 8" tube with 1/2" end plates and retractable |
| Rear Bolster |
Fabricated box type I-beam with 3/8" flanges and swing down twistlocks. |
| Twist Lock & Slide Pins |
Meets ISO standards and requirements |
| Slider Mechanism |
Lock engagement ensured by two spring-loaded pins through main beams. Movement is facilitated by steel rollers. |
| ICC Bumper |
3/16" x 4" x 4" tube step bumper. Two (2) rubber bumpers. |
| Landing Gear |
Jost two speed AAR approved, square leg. 50,000 lb lift capacity and 140,000 lb static load capacity. |
| Landing Gear Axle Type |
Standard |
| Landing Gear Foot Group |
10 in. by 10 in. Low profile sandshoe |
| Crank Handle Location |
Curb side handle |
| Axle Quantity |
Three Axles |
| Suspension |
Eveley Spring-Ride |
| Axle Centers |
60 inch, all axles |
| Springs |
Mono Leaf |
| Hub Type |
Hub piloted for disc wheels |
| Hub Material |
Steel |
| Hub Manufacturer |
KIC |
| Drum |
Outboard mounted |
| Rim/Wheels |
8.25 X 22.5 hub piloted tubeless |
| Wheel/Rim Color |
White |
| Rim Spacer |
None |
| Tires |
Cheetah Supplied |
| Tire Size |
255/70R22.5 (Low profile) |
| Tire Inflation System |
None |
| Axle Vendor |
Meritor |
| Axle Type |
TN/TQ |
| Wall Thickness |
1/2 inch |
| Axle Track |
71 ½ |
| Brake Lining Options |
Standard |
| Lubrication |
Oil 90 wt. |
| Slack Adjusters |
Bendix 5 1/2 inch |
| Brake System Vendor |
WABCO |
| Brake System Type |
2S1M |
| Brake Chambers |
Haldex |
| Hubodometer |
None |
| Electrical System |
12 volt, 7-way split pin receptacle plug; modular wiring harness |
| Light Vendor |
TruckLite |
| Light Attachment |
Grommet mounted |
| Light Type |
Incandescent |
| Mid-ship Turn Signal |
Yes |
| Metal Preparation |
Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
| Primer |
70% Zinc Rich Primer |
| Topcoat |
Urethane |
| Color |
Black |
| Markings |
FHWA plate, tare weight, 2 small Cheetah logos. |
| Customer Decals |
Cheetah Supplied |
| Conspicuity |
Meets DOT requirements |
| Registration Holder |
Plastic with clear screw on top |
| Mud Flaps |
Cheetah Supplied |
| Mud Flap Mounting |
4 mounting bolts |
| Steel & Fastners |
All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 unless otherwise specified. All structural fasteners are Grade 5 or better and are zinc coated |
| GVWR |
65,000 lb |
| Weight |
Approximately 11,200 lbs. + 2% |