40’ Gooseneck 2-Axle Chassis

Carries one 40' ISO container

40’ Tandem Gooseneck Container Chassis (1)

Simple but effective, the 40’ gooseneck container chassis is capable of hauling a 40’ ISO container with a GVWR of 65,000 lbs. This model is the workhorse standard of chassis fleets throughout the United States.

This gooseneck container chassis is assembled in the USA, featuring state-of-the-art fabrication, welding, and paint systems.

General Specs

Tare Weight:
Approximately 6,400 lb.
GVWR:
75,000 lb.
Steel & Fasteners:
All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better. All structural fasteners are Grade 5 or better and are zinc coated
Main Beams:
Wide flange I-Beam 12" deep, 19 lb./ft.
Cross Member:
All cross members fabricated with 10-gauge steel
Upper Coupler Assembly:
5/16" thick pick-up plate
Fifth Wheel Height:
48 inches
Front Bolster:
Fabricated 7.75" tall × 7.375" wide channel with steel casting end plates
Rear Bolster:
Channel type
ICC Bumper:
47" long tube
Mud Flaps:
24" × 30" white plastic, 4 hole mounting
Electrical System:
12 volt, 7-way split pin receptacle plug; modular wiring harness

Dimensions

Overall Chassis Width:
96 inches
Maximum Rear Height:
48 inches
Overall Chassis Length:
40.61 feet

Landing Gear

Landing Gear:
Two speed AAR approved, square leg. 55,000 lb. lift capacity and 160,000 lb. static load capacity.
Landing Gear Foot Group:
10" × 10" low profile sandshoe
Crank Handle Location:
Roadside

Lighting

Light Attachment:
Flange mounted
Light Type:
LED

Brakes

Drum:
Steel outboard mounted
Lubrication:
Grease Synthetic
Brake System Type:
2S1M
Brake Chambers:
30/30

Wheels

Rims:
8.25" × 22.5" hub piloted tubeless
Tire Size:
11R 22.5
Hub Type:
Steel

Axles

Axle Quantity:
Two
Axle Centers:
49 inches
Tandem Location:
50 inches from rear
Kingpin Location:
30 inches from rear face of front bolster.

Suspension

Suspension Type:
Three-leaf spring ride

Finish

Metal Preparation:
Clean, dry steel and NACE No. 3 /SSPC-SP-6 commercial blast cleaning
Primer:
Zinc-rich primer
Topcoat:
Black urethane

RE: 40’ Gooseneck 2-Axle Chassis

Would you like to receive more information about the 40’ Gooseneck 2-Axle Chassis? Fill out the simple form below, and a Cheetah Chassis representative will contact you.

*
*
*
*
*

Privacy: Cheetah Chassis does not send unsolicited email (SPAM) or share your email address with anyone.