23.5’ Slider Chassis

Carries one 20' ISO container

23-5_Whiteout.jpg

The 23.5' Slider Chassis is the standard model throughout the United States for carrying 20' ISO containers. The 44" sliding bogie provides greater carrying capacity under federal bridge law regulations.

This extendable container chassis is assembled in the USA and built to last, featuring state-of-the-art fabrication, welding, and paint systems.

 

General Specs

Tare Weight:
Approximately 6,450 lb.
GVWR:
54,000 lb.
Steel & Fasteners:
All structural steel is ASTM-A572, Grade 50, or ASTMA607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated
Main Beams:
Fabricated I-beam with high-tensile steel
Bogie Beams:
6" × 4.25" tube
Cross Member:
Fabricated steel
Upper Coupler Assembly:
5/16"-thick pick up plate
Front Bolster:
Single piece fabricated channel with 3/8" top plate
Rear Bolster:
Single piece fabricated channel with 3/8" top plate
ICC Bumper:
4" × 4" tube, 47" long
Pintle Hook:
None
Mud Flaps:
24" × 24" white plastic
Electrical System:
12 volt, 7-way split pin receptacle plug; modular wiring harness
Slider Mechanism:
Spring-loaded pins
Slide Range:
44 inches
Overall Length Closed:
23.2 feet
Overall Length Extended:
26.9 feet

Dimensions

Overall Chassis Width:
96 inches
Maximum Rear Height:
52.5 inches

Landing Gear

Landing Gear:
AAR-approved two speed with square leg. 55,000-lb. lift capacity and 160,000-lb. static load capacity.
Landing Gear Foot Group:
10" × 10" low profile sandshoe
Crank Handle Location:
Roadside

Lighting

Light Attachment:
Flange mounted
Light Type:
LED

Brakes

Drum:
Steel outboard mounted
Lubrication:
Synthetic grease
Brake System Type:
2S1M
Brake Chambers:
30/30

Wheels

Rims:
8.25" × 22.5" hub piloted tubeless
Tire Size:
11R 22.5
Hub Type:
Hub piloted for disc wheels

Axles

Axle Type:
5" round, tapered 71.5" track
Axle Quantity:
Two
Axle Centers:
49 inches
Tandem Location:
49 inches from rear to center of tandem
Kingpin Location:
15 inches from front of chassis

Suspension

Suspension Type:
Three-leaf spring ride

Finish

Metal Preparation:
Clean, dry steel and NACE No. 3 /SSPC-SP-6 commercial blast cleaning
Primer:
Zinc-rich primer
Topcoat:
Black urethane

RE: 23.5’ Slider Chassis

Would you like to receive more information about the 23.5’ Slider Chassis? Fill out the simple form below, and a Cheetah Chassis representative will contact you.

*
*
*
*
*

Privacy: Cheetah Chassis does not send unsolicited email (SPAM) or share your email address with anyone.