22' Reverse B–Train Chassis (Lead)

Carries one 20 ft ISO Container.

b-train-front-z1.jpg

Our B-Train chassis is specifically designed for use in Canada and carries one 20’ container weighing up to 59,000 lbs.  It’s equipped with a fifth wheel located 27 ¾ in. from the rear of the container chassis allowing for the hauling of the reverse b-train rear chassis and doubling your payload.

General Specs

Tare Weight:
Approximately 8,300 lbs.
GVWR:
59,000 lbs.
Steel & Fasteners:
All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better. All structural fasteners are Grade 5 or better and are zinc coated
Main Beams:
Steel fabricated I-beam
Cross Member:
Fabricated steel
Upper Coupler Assembly:
Pick up plate is 5/16 in. thick
Fifth Wheel Height:
48 in.
Fifth Wheel Location:
27 3/4 in. from rear of chassis.
Front Bolster:
6 in. X 8 in. fabricated steel
Rear Bolster:
4 in. X 8 in. Fabricated
ICC Bumper:
47 in. long tube
Mud Flaps:
24 in. X 24 in. white plastic, 4 hole mounting
Electrical System:
12 volt, 7-way split pin receptacle plug; modular wiring harness
Slider Mechanism:
Air operated locking pin
Slider Beams:
Fabricated with stacking beams
Overall Length Closed:
22 ft. 1 in.
Overall Length Extended:
28 ft. 10 in.

Dimensions

Overall Chassis Width:
102 in.
Maximum Rear Height:
51 in.
Overall Chassis Length:
22 ft. 1 in. closed / 28 ft. 10 in. extended

Landing Gear

Landing Gear:
Two speed AAR approved, square leg. 55,000 lb. lift capacity and 160,000 static load capacity.
Landing Gear Foot Group:
10 in. X 10 in. Low profile sandshoe
Crank Handle Location:
Roadside

Lighting

Light Attachment:
Flange mounted
Light Type:
LED

Brakes

Drum:
Steel outboard mounted
Lubrication:
Synthetic grease
Brake System Type:
2S1M
Brake Chambers:
30 / 30

Wheels

Rims:
Steel 22.5 X 8.25 hub piloted
Tire Size:
11R 22.5
Hub Type:
Steel

Axles

Axle Type:
5 in. round, tapered, 77 1/2 in. long
Axle Quantity:
Two Axles
Axle Centers:
72 1/2 in.
Tandem Location:
63 3/8 in. from rear of slider
Kingpin Location:
15 in. from front of chassis
Kingpin Height:
48 in.

Suspension

Suspension Type:
Three-leaf spring ride

Finish

Metal Preparation:
Clean, dry steel and NACE No. 3 /SSPC-SP-6 commercial blast cleaning
Primer:
Zinc-rich primer
Topcoat:
Black urethane

RE: 22' Reverse B–Train Chassis (Lead)

Would you like to receive more information about the 22' Reverse B–Train Chassis (Lead)? Fill out the simple form below, and a Cheetah Chassis representative will contact you.

*
*
*
*
*

Privacy: Cheetah Chassis does not send unsolicited email (SPAM) or share your email address with anyone.