North America's Premier Manufacturer of Container Chassis

Sales
Kathy Watts

570-802-5250
Parts
Jeff Jennings

866-949-4774
Address
3rd & Oak Streets
P.O. Box 388
Berwick, PA 18603
|_

50’ Concrete Panelmaster Trailer

50' Concrete Panel Master Trailer

Chassis Specifications

Function Carries two 30 ft x 12 ft 9 in x 8 in panels weighing 19,000 lbs. each and meets all DOT, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of manufacture and applicable to operation in the United States.
Overall Length 49 ft. 11 in.
Overall Width 102 inches
Tandem Location 54 3/4 inches
Kingpin Location 20 1/4 inches from front
Maximum Frame Height 144 5/8 in. excluding hand rails
Frame Width 100 in.
Main Beams A-Frame, channel, and 3"x3" tubing
Upper Coupler Assembly Pick up plate is 1/4” thick and extends approximately 19” behind the kingpin and is reinforced fore and aft by 8 inch formed channels
Walk Way Walk way extends the full length of the loading area with access ladder.
ICC Bumper 4 inch x 4inch x 3/16 inch tube step bumper.
Landing Gear Jost two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity.
Landing Gear Axle Type Standard
Landing Gear Foot Group 10 in. by 12 in. Low profile sandshoe
Crank Handle Location Curb side handle
Rear Prop Leg Manual drop down in 2 inch increments
Axle Quantity Two Axles
Suspension Type Air-Ride with automatic dump and ride height over ride switch.
Axle Centers 54 inch
Hub Type Hub piloted for disc wheels
Hub Material Steel
Drum Outboard mounted
Rims/Wheel 8 1/4 X 22.5 hub piloted tubeless
Wheel/Rim Color White
Tires Yokohama RY587
Tire Size 295/75R 22.5
Tire Inflation System None
Axle Type TQ
Wall Thickness 5/8 inch
Axle Track 77.5
Brake Lining Options Standard
Lubrication Oil 90 wt.
Brake System Type 2S1M
Brake Chambers 30/30
Hubodometer None
Electrical System 12 volt, 7-way split pin receptacle plug; modular wiring harness
Light Attachment Grommet mounted
Light Type LED
Metal Preparation Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning”
Primer 70% Zinc Rich Primer
Topcoat Urethane Topcoat
Color Deep Blue
Markings FHWA plate, tare weight, 2 Evans logos.
Customer Decals Furnished by Customer
Conspicuity Meets DOT requirements
Registration Holder Plastic with clear screw on top
Mud Flaps Plastic anti sail
Steel & Fasteners All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated
GVWR 51,600 lbs
Weight Approximately 13,600 lbs. +/- 2%

Contact Us

Re: 50’ Concrete Panelmaster Trailer

Would you like to receive more information about the 50’ Concrete Panelmaster Trailer? Fill out the simple form below and a Cheetah Chassis representative will contact you.

*indicates a required field