| Frame Rating |
100,000 lbs. Evenly distributed load over the length of the trailer. 50,000 lbs distributed over 4 feet with the suspension in the forward position. 43,000 lbs distributed over 4 feet with the suspension in the rear position. |
| Tare Weight |
Approximately 11,987 lbs. |
| Overall Chassis Length |
48 ft. |
| Overall Chassis Width |
102 inches |
| Kingpin Location |
36 inches |
| Tractor Fifth Wheel Height |
48 inches |
| Tandem Center Line |
Sliding, Slide range from 58 inches to 130 inches |
| Rear Height |
Approximately 54 inches |
| Main Beams |
Fabricated High Tensile Steel |
| Upper Coupler Assembly |
Pick up plate is 1/4” thick and is reinforced fore and aft of the kingpin by 1/4 inch formed channels |
| ICC Bumper |
4" square tube step bumper, D.O.T. approved under ride guard, (1) set two hole rubber dock bumpers |
| Cross Member |
4 inch x 3.19 lbs / ft. structural I Beam on 16 inch centers |
| Side Rail |
C6 x 6.5 lbs/ft |
| Rub Rail |
1/4 inch x 2 1/2 inch flat steel with single pipe spool spacers between stake pockets |
| Stake Pockets |
1 5/8 inches deep, 3 1/2 inches wide, 4 inches tall (inside dimensions)
|
| Floor |
1 1/8 inch thick Apitong or Angelin Pedra, 2 screws per board. |
| Landing Gear |
Two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity. |
| Landing Gear Axle Type |
Standard |
| Landing Gear Foot Group |
10 in. by 10 in. Low profile sandshoe |
| Crank Handle Location |
Curb side handle |
| Axle Quantity |
Two Axles |
| Suspension Type |
Spring-Ride |
| Axle Centers |
49 inch |
| Springs |
Three Leaf |
| Hub Type |
Hub piloted for disc wheels |
| Hub Material |
Steel |
| Drum |
Outboard mounted |
| Rim/Wheels |
8 1/4 X 22.5 hub piloted tubeless |
| Wheel/Rim Color |
White |
| Tires |
Evans supplied |
| Tire Size |
11R 22.5 |
| Tire Inflation System |
None |
| Brake Lining Options |
Standard |
| Lubrication |
Oil 90 wt. |
| Brake System Type |
2S1M |
| Slack Adjusters |
Automatic |
| Brake Chambers |
30 / 30 |
| Hubodometer |
None |
| Electrical System |
12 volt, 7-way split pin receptacle plug; modular wiring harness, rear plug for strobe lights |
| Light Attachemnt |
Grommet mounted |
| Light Type |
Incandescent |
| Metal Preparation |
Clean, dry steel and NACE No. 3 /SSPC-SP-6 "Commercial Blast Cleaning" |
| Primer |
70% Zinc |
| Topcoat |
Urethane |
| Color |
Black |
| Markings |
FHWA plate |
| Customer Decals |
Furnished by Customer |
| Conspicuity |
Meets DOT requirements |
| Registration Holder |
Plastic with clear screw on top |
| Mud Flaps |
Plastic anti sail |
| Winches Track |
None |
| Winches Fixed |
None |
| Winches Sliding |
None |
| Straps |
None |
| Chain Sleeves |
None |
| D Rings |
None |
| Side Kit |
None |
| Bulk Head |
None |
| Coil Package |
None |
| Tire Carrier |
None |
| Tool Boxes |
None |
| Steel & Fastners |
All structural steel is ASTM-A572, Grade 50, or ASTMA607,
Grade 50. All structural fasteners are Grade 5 or
better and are zinc coated |
| GVWR |
65,000 lbs |