| Function |
Carries one 40 ft ISO Container. Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States. |
| Overall Chassis Length |
(extended) 55 feet
(closed) 46 feet
Intermediate Stops at 49' and 53' |
| Overall Chassis Width |
96 inches |
| Axle Location |
Rear axle is 25½ inches from rear of chassis. |
| Kingpin Location |
18 inches from front of chassis. |
| Maximum Rear Height |
48 inches. |
| Main Beams |
Fabricated I-Beam |
| Cross Member |
All crossmembers are formed from 10 gauge steel. |
| Cross Bracing |
Lateral |
| Upper Coupler Assembly |
Pick up plate is 5/16” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by 5/16 inch formed channels |
| Front Bolster |
¼ inch wall x 6 inch x 8 inch tube with ½ inch end plates. |
| Rear Bolster |
Box type with 3/8 inch x 8 inch top plate and ¼ inch
thick, formed channel lower member with ICC light
holes. A small license plate bracket will be mounted on
the under side. |
| Twist Lock & Slide Pins |
Meets ISO standards and requirements |
| Slider |
Fabricated Beam with two spring loaded pins through
main beams. Movement is facilitated by low friction slide
pads. |
| ICC Bumper |
4 inch x 4inch x 3/16 inch Tube step bumper. No Rubber
dock bumpers) |
| Landing Gear |
Jost two speed, AAR approved, square leg. 50,000 lb lift capacity;
140,000 lb static load capacity. |
| Landing Gear Axle Type |
Standard |
| Landing Gear Foot Group |
Low profile, 10" x 10" sandshoe |
| Crank Handle Location |
Curb side crank handle. |
| Suspension |
Hutch Three axle spring ride. One Watson and Chalin steerable air ride with lift system. (single tire configuration) mounted 92" forward of tri-axle. |
| Axle Quantity |
Four Axles |
| Suspension Type |
Three Spring-Ride, one air ride lift |
| Axle Centers |
60 inch on spring tri-dem |
| Springs |
Three Leaf |
| Hub Type |
Hub piloted for disc wheels |
| Hub Material |
Steel |
| Hub Manufacturer |
KIC |
| Drum |
Outboard mounted |
| Rim/Wheels |
8 1/4 X 22.5 hub piloted tubeless |
| Wheel/Rim Color |
White |
| Rim Spacer |
None |
| Tires |
Cheetah Supplied |
| Tire Size |
(14) 255/70R 22.5 |
| Tire Inflation System |
None |
| Axle Vendor |
Three Meritor, one Watson & Chalin |
| Axle Type |
TN |
| Wall Thickness |
1/2 inch |
| Axle Track |
71.5 |
| Brake Lining Options |
Standard |
| Lubrication |
Oil 90 wt. |
| Slack Adjusters |
Bendix 5 1/2 inch |
| Brake System Vendor |
WABCO |
| Brake System Type |
2S1M |
| Brake Chambers |
Haldex |
| Hubodometer |
None |
| Electrical System |
12V, 7-way split pin receptacle plug; modular wiring harness |
| Light Vendor |
TruckLite |
| Light Attachment |
Grommet mounted |
| Light Type |
Incandescent |
| Metal Preparation |
Clean, dry steel and NACE 3/SSPC-SP-6 ‘Commercial Blast
Cleaning’. |
| Primer |
70% Zinc Rich Primer |
| Topcoat |
Urethane Topcoat |
| Color |
Black |
| Markings |
FHWA plate, tare weight, 2 small Cheetah logos. |
| Customer Decals |
Furnished by Customer |
| Conspicuity |
Meets DOT requirements |
| Registration Holder |
Plastic with clear screw on top |
| Mud Flaps |
Cheetah Supplied |
| Mud Flap Mounting |
4 mounting bolts |
| Steel & Fastners |
All structural steel is ASTM-A572, Grade 50, or ASTMA607,
Grade 50. All structural fasteners are Grade 5 or
better and are zinc coated |
| GVWR |
92,000 lbs |
| Weight |
Approximately 13,500 lbs. + 2% |