| Function |
Carries one 30 ft ISO Container/Generator. Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States. |
| Overall Chassis Length |
30 ft. 6 inches |
| Overall Chassis Width |
96 inches |
| Tandem Location |
54 inches |
| Kingpin Location |
30½ inches from rear face of front bolster. |
| Kingpin Height |
48 in. |
| Maximum Rear Height |
48 in. |
| Main Frame Width |
40 in. |
| Main Beams |
Wide flange I-Beam 12 inch deep, 19 lb/ft, hot rolled
steel, ASTM A572-50 |
| Gooseneck Beams |
5 inches deep I-Beam, fabricated with ½ inch x 4-inch
flanges and ¼ inch x 4 inch w |
| Cross Member |
All cross members are formed from 10-gauge steel |
| Upper Coupler Assembly |
Pick up plate is 5/16” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by ¼ inch formed channels |
| Front Bolster |
¼ inch thick channel 9 inches high x 6 inches deep with 10 gauge stiffeners |
| Rear Bolster |
Box type with 3/8 inch x 8 inch top plate and ¼ inch thick, formed channel lower member with ICC light holes. A small license plate bracket will be mounted on the under side. |
| Twist Lock & Slide Pins |
Meets ISO standards and requirements. |
| ICC Bumper |
4 inch x 4inch x 3/16 inch Tube step bumper. Main beam
and bumper struts are extended 2 inches to protect rear
bolster. (No rubber dock bumpers) |
| Landing Gear |
Jost two speed AAR approved, square leg. 50,000 lb. lift
capacity and 140,000 static load capacity. |
| Landing Gear Axle Type |
Standard |
| Landing Gear Foot Group |
10 in. by 10 in. Low profile sandshoe |
| Crank Handle Location |
Curb side handle |
| Suspension |
Hutch |
| Axle Quantity |
Two Axles |
| Suspension Type |
Spring-Ride |
| Axle Centers |
49 inch |
| Springs |
Three Leaf |
| Hub Type |
5 spoke |
| Hub Material |
Steel |
| Hub Manufacturer |
KIC |
| Drum |
Inboard mounted (5 spoke) |
| Rim/Wheels |
7 1/2 X 20 tube type |
| Wheel/Rim Color |
White |
| Rim Spacer |
4" Corrugated |
| Tires |
Cheetah Supplied |
| Tire Size |
10:00 X 20 |
| Tire Inflation System |
None |
| Axle Vendor |
Meritor |
| Axle Type |
TN |
| Wall Thickness |
1/2 inch |
| Axle Track |
71.5 |
| Brake Lining Options |
Standard |
| Lubrication |
Shell Alvania Grease (EP) |
| Slack Adjusters |
Bendix 5 1/2 inch |
| Brake System Vendor |
WABCO |
| Brake System Type |
2S1M |
| Brake Chambers |
Haldex |
| Hubodometer |
None |
| Electrical System |
12 volt, 7-way split pin receptacle plug; modular wiring harness |
| Light Vendor |
TruckLite |
| Light Attachment |
Grommet mounted |
| Light Type |
Incandescent |
| Metal Preparation |
Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning” |
| Primer |
70% Zinc Rich Primer |
| Topcoat |
Urethane Topcoat |
| Color |
Black |
| Markings |
FHWA plate, tare weight, 2 small Cheetah logos. |
| Customer Decals |
Furnished by Customer |
| Conspicuity |
Meets DOT requirements |
| Registration Holder |
Plastic with clear screw on top |
| Mud Flaps |
Cheetah Supplied |
| Mud Flap Mounting |
4 mounting bolts |
| Steel & Fastners |
All structural steel is ASTM-A572, Grade 50, or ASTMA607, Grade 50. All structural fasteners are Grade 5 or better and are zinc coated |
| GVWR |
65,000 lbs |
| Weight |
Approximately 6,100 lbs. + 2% |